Panel Bond adhesive - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**rechinca** · 08-27-2020, 10:04 PM

I am getting close to installing the inner cowl replacement piece. A thought occurred to me regarding 3M panel bond adhesive and their Structural panel adhesive. Do you think it would work instead of the 90 spotwelds I drilled out to remove it? I know it carries some weight and structure as the fenders bolt into it, so maybe the structural adhesive would be better. It may also help prevent some of the water/moisture penetration when combined with the seam sealer. Anybody have experience or thoughts on the subject?

08-27-2020, 10:04 PM	#1
rechinca Senior Member Join Date: Jul 2018 Location: Vacaville, CA Posts: 535	Panel Bond adhesive I am getting close to installing the inner cowl replacement piece. A thought occurred to me regarding 3M panel bond adhesive and their Structural panel adhesive. Do you think it would work instead of the 90 spotwelds I drilled out to remove it? I know it carries some weight and structure as the fenders bolt into it, so maybe the structural adhesive would be better. It may also help prevent some of the water/moisture penetration when combined with the seam sealer. Anybody have experience or thoughts on the subject? __________________ 1971 Custom/10 - 350/3 speed, Orange/White roof



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.