![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Jan 2003
Location: Emmett, Idaho
Posts: 858
|
Cab and Doors, New Floors and Rockers
I have a 1970 non A/C cab I'm just finishing for sale. The floors and rockers are new, the rest was still very good. The heater and clutch openings have been welded up, so it set up for Vintage Air or and Old Air system. Dash is uncut. Corners had a small spot on each side, about the size of a quarter, that were cut out and new area welded in. The supports are solid. Still a few small dings, almost ready for primer. The doors are both nice, rust free and need very little. $500. As soon as I get all the panels welded in I'll get some pictures.
I'm going up to Vancouver around the 12th, so I can deliver along I-5 in NorCal, Oregon, or SW WA. I also have a bunch of other parts available that can get delivered along the way as well. Take a look at the Parts page in my signature. I'll have a smaller load heading back, so if you have parts that need a ride this way let me know, I can probably help get them as far as Sacramento.
__________________
Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability" |
![]() |
![]() |
Bookmarks |
|
|