|
|
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
Buickwc67 PCV with turbo setup HELP 12-15-2020, 10:21 PM
geezer#99 Re: PCV with turbo setup HELP 12-15-2020, 10:31 PM
Custom 68 Re: PCV with turbo setup HELP 12-16-2020, 06:32 PM
tj1970cst Re: PCV with turbo setup HELP 12-16-2020, 12:03 AM
SkidmoreGarage Re: PCV with turbo setup HELP 12-16-2020, 03:59 AM
SCOTI Re: PCV with turbo setup HELP 12-16-2020, 11:20 AM
Buickwc67 Re: PCV with turbo setup HELP 12-16-2020, 05:29 PM
Custom 68 Re: PCV with turbo setup HELP 12-16-2020, 06:28 PM
Buickwc67 Re: PCV with turbo setup HELP 12-16-2020, 05:33 PM
layinrocker65 Re: PCV with turbo setup HELP 12-16-2020, 11:49 AM
Buickwc67 Re: PCV with turbo setup HELP 12-16-2020, 05:32 PM
Custom 68 Re: PCV with turbo setup HELP 12-16-2020, 12:35 PM
Buickwc67 Re: PCV with turbo setup HELP 12-16-2020, 08:02 PM
geezer#99 Re: PCV with turbo setup HELP 12-16-2020, 08:30 PM
Buickwc67 Re: PCV with turbo setup HELP 12-16-2020, 08:55 PM
RichardJ Re: PCV with turbo setup HELP 12-16-2020, 08:59 PM
Buickwc67 Re: PCV with turbo setup HELP 12-16-2020, 09:22 PM
Buickwc67 Re: PCV with turbo setup HELP 12-16-2020, 09:23 PM
geezer#99 Re: PCV with turbo setup HELP 12-16-2020, 09:24 PM
|
12-15-2020, 10:21 PM | #1 |
Registered User
Join Date: Jan 2018
Location: El Paso TX
Posts: 8
|
PCV with turbo setup HELP
Thanks in advance guys, i have a freshly rebuilt 6.0 LS mated to a T56 in my 71 Cheyenne. Problem is that after driving it for a couple of minutes i start seeing smoke (bluish black) i assume oil, start coming from the exhaust. Im running a 78 mm turbo and noticed today that the turbo was leaking from both sides of the turbines. From what ive read im having excessive blow by or incorrectly set up pcv. What are some ways to set this up correctly or any ideas?
My current setup is : Drivers side valve cover (with pcv) hose to top of Catch can (non vented). Then from catch can to intake manifold close to throttle body. Passengers side valve cover only has one opening and that is capped off. My piston rings were gapped 26 top ring and second ring at 28. Thanks again guys |
Bookmarks |
Tags |
6.0, pcv valve, turbo |
|
|