Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-02-2021, 07:08 PM | #1 |
Senior Member
Join Date: Feb 2001
Location: Killen, Alabama USA
Posts: 3,628
|
Brake drum stuck! How?
Working on a 68 1/2 that’s been sitting for a year. Left front drum was tight but it would roll. Topped of master cylinder and went to bleed all 4 corners. Couldn’t get left front to bleed, found that rubber line was stopped up. Replaced line and bled air bubbles out. Test drove it down the driveway and when I applied the brakes the left front locked up and will not release. I took the wheel off and tried to break it loose with a big pry bar and had to stop when I started bending the lug nuts! First, I assume that the wheel cylinder is frozen up? What then? How do I get it loose or get the drum off? Thanks for any help.
__________________
72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior |
Bookmarks |
|
|