Fuse box - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kaycee · 01-05-2021, 09:37 AM

63 C10 only about half of fuses box has power .I have tail lights,blinkers front and back. I just pulled this ruck home so still trying to figure out what is what and what was cobbled together. Key on I only have about 3 fuses hot pulled fuses to make sure they are good contact and looks like no wires are butchered up or spliced. So my ? is reading the schematic from FAQ forum the hot comes in through the light switch and then to the fuse box.I lose power at the firewall and no power at rad. support.I'm thinking the light switch is the culprit any ideas ?

01-05-2021, 09:37 AM	#1
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,445	Fuse box 63 C10 only about half of fuses box has power .I have tail lights,blinkers front and back. I just pulled this ruck home so still trying to figure out what is what and what was cobbled together. Key on I only have about 3 fuses hot pulled fuses to make sure they are good contact and looks like no wires are butchered up or spliced. So my ? is reading the schematic from FAQ forum the hot comes in through the light switch and then to the fuse box.I lose power at the firewall and no power at rad. support.I'm thinking the light switch is the culprit any ideas ? __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.