Transfer Case Grinding in 4WD - The 1947 - Present Chevrolet & GMC Truck Message Board Network

truckster · 02-03-2021, 10:58 PM

I just got my Blazer running again after 8 years. I took it out for a drive today - everything seemed good in 2HI, but in 4HI and 4LO there's a grinding noise coming from the transfer case. It's a 350/350/NP205 drive train. The transfer case worked great before I parked it due to a thrown rod. I did disconnect the driveshafts to move the transmission and transfer case while I was working on it, but I didn't disconnect the transmission from the transfer case.

Any ideas?

02-03-2021, 10:58 PM	#1
truckster Registered User Join Date: Jan 2001 Location: Orem, Utah Posts: 7,983	Transfer Case Grinding in 4WD I just got my Blazer running again after 8 years. I took it out for a drive today - everything seemed good in 2HI, but in 4HI and 4LO there's a grinding noise coming from the transfer case. It's a 350/350/NP205 drive train. The transfer case worked great before I parked it due to a thrown rod. I did disconnect the driveshafts to move the transmission and transfer case while I was working on it, but I didn't disconnect the transmission from the transfer case. Any ideas? __________________ I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.