Flywheel / Torque Converter Cover? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChevyGuyNC · 02-28-2021, 07:47 PM

While changing out the plugs and wires, I noticed the flywheel cover, which surprisingly was plastic, had broken loos at one of the bolts and was hanging cockeyed. So I removed the rest of the bolts and pulled it down, and it was chewed up where it must have come in contact with the flywheel.

I've searched all over and can't find one that says it's specifically for my truck... And the threads here all seem to be people don't have the bolts, much less the cover...

Anyone have a source for this part, or would a 'typical' TH350 cover work?

02-28-2021, 07:47 PM	#1
ChevyGuyNC Registered User Join Date: Sep 2011 Location: Jacksonville, FL Posts: 143	Flywheel / Torque Converter Cover? While changing out the plugs and wires, I noticed the flywheel cover, which surprisingly was plastic, had broken loos at one of the bolts and was hanging cockeyed. So I removed the rest of the bolts and pulled it down, and it was chewed up where it must have come in contact with the flywheel. I've searched all over and can't find one that says it's specifically for my truck... And the threads here all seem to be people don't have the bolts, much less the cover... Anyone have a source for this part, or would a 'typical' TH350 cover work? __________________ 1972 Cheyenne Super LWB, 350V8, AC, PS, PB, all original 46k survivor



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.