Manual Steering Box swap question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Zeekmiester · 04-19-2021, 08:48 AM

Morning Folks,

I have a 1960 GMC stepper 2WD. My original gearbox was pretty sloppy and I opted to replace it with one from POL. What I noticed is on my original there is a pipe plug to inspect fluid level. On the replacement I received there is no fill plug, the location is casted closed (see pics). The only way I can see to check fluid level is to remove the adjustment plate on top and I am not sure if this could screw anything up if removed. I am waiting on a reply from POL if this is a sealed unit and if it was even filled to bolt right on. Appreciate any info if yall have run into this before.
Thanks

04-19-2021, 08:48 AM	#1
Zeekmiester Registered User Join Date: Nov 2018 Location: N.E. Ohio Posts: 28	Manual Steering Box swap question Morning Folks, I have a 1960 GMC stepper 2WD. My original gearbox was pretty sloppy and I opted to replace it with one from POL. What I noticed is on my original there is a pipe plug to inspect fluid level. On the replacement I received there is no fill plug, the location is casted closed (see pics). The only way I can see to check fluid level is to remove the adjustment plate on top and I am not sure if this could screw anything up if removed. I am waiting on a reply from POL if this is a sealed unit and if it was even filled to bolt right on. Appreciate any info if yall have run into this before. Thanks Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.