Lots of mirror holes - best fill practices? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ItWillBeSlow · 07-31-2021, 07:55 PM

Im stripping down my doors to get ready for epoxy and fixing the bad stuff.

My doors have 10 holes each. I put 3 of them in with my reproduction DG4(ish) mirrors. I am not sure exactly what the others are - (4) small ones and (3) large ones. I think the truck originally had DG4 mirrors.

My question is what is the best method to fill the large ones. The holes are at least 3/8" in diameter. I can get copper behind them but wanted to verify trying to fill them with a copper backer is the best method with something this large.

Thoughts?

07-31-2021, 07:55 PM	#1
ItWillBeSlow Registered User Join Date: May 2013 Location: You're the only 10 I see Posts: 367	Lots of mirror holes - best fill practices? Im stripping down my doors to get ready for epoxy and fixing the bad stuff. My doors have 10 holes each. I put 3 of them in with my reproduction DG4(ish) mirrors. I am not sure exactly what the others are - (4) small ones and (3) large ones. I think the truck originally had DG4 mirrors. My question is what is the best method to fill the large ones. The holes are at least 3/8" in diameter. I can get copper behind them but wanted to verify trying to fill them with a copper backer is the best method with something this large. Thoughts? Attached Images __________________ 1972 C20



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.