TH350 / NP205 Cross member location - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gregbr · 09-21-2021, 08:56 PM

On my 67 4wd short bed with a 350, where should the TH350/NP205 cross member be located to put the transfer case shifter in the proper location?

Measurements and pics would be great...and advice.

My truck is a factory 4wd, factory V8, factory short bed. When I got the truck someone had swapped in a mid 70's 350, TH350, & NP203. So there are a couple extra bolt holes from all the swaps. I have a 205 and the original cross member set with skid plate from a 70-72 to put in.

I'd like to end up with the transfer case shifter in about the original position and have enough room at the engine & firewall for a HEI distributor.

Thanks.

09-21-2021, 08:56 PM	#1
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	TH350 / NP205 Cross member location On my 67 4wd short bed with a 350, where should the TH350/NP205 cross member be located to put the transfer case shifter in the proper location? Measurements and pics would be great...and advice. My truck is a factory 4wd, factory V8, factory short bed. When I got the truck someone had swapped in a mid 70's 350, TH350, & NP203. So there are a couple extra bolt holes from all the swaps. I have a 205 and the original cross member set with skid plate from a 70-72 to put in. I'd like to end up with the transfer case shifter in about the original position and have enough room at the engine & firewall for a HEI distributor. Thanks. __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.