WTB: Orig Parts to Dress out My SBC Long Block

[Rakort]

Looking for a bunch of parts to dress out a 350 long block I'm gona drop in my 68 C10 with an Auto Tranny

I'm leaning towards what I believe is the 69 or so variety without the oil fill tube in the intake and one that has the PCV type arrangement and with the throttle linkage, not the throttle cable type. Was there such a variety with and linkage throttle and cable for AT kickdown???

Looking for:

Intake (will consider 2 or 4 bbl)
Carb
Throttle Spring
Bracket for AT kickdown cable
RH Ram Exhaust manifold (2" angle dump) or pair of 2-1/4" angle dump
(no air pump ports in exhaust manifold)
Oil Fill Tube for Valve Cover
Set of Valve Covers
Air Cleaner
Spark Plug Wire Looms
Spark Plug Heat Shields

I have everything I need for the front of the motor....ie alt and PS brackets, pulleys, etc.

Basically I want to setup the motor to be original "looking." I'm not going to be all anal about exactly correct for a 1968 V-8 with AT, but when I pop the hood I want it to look original for a 67-72 truck.


Also parting out a 69 GMC 3/4 ton camper special....let me know your needs..

Thanks
Brian aka Rakort