Rebuild or replace front axle? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1970BannerBlazer · 09-29-2021, 07:25 PM

Looking for opinions on my dilemma. My, new to me, 1970 Blazer has a front axle problem. Namely its a piece of junk. See photo.
Name: IMG_5537.jpg
Views: 291
Size: 100.5 KB

Name: IMG_5537.jpg
Views: 291
Size: 100.5 KB

Should I rebuild this thing or replace it?

Rebuild will require the use of my mechanic and cost around $1300 (I already had to rebuild the entire rear end). Replace will be about $450 for an axle out of a 85 Blazer. The swap I think I can do on my own. That axle would be a 10 bolt and not a Dana 44 like it is now.

I have already swapped in a disk brake kit on the front so I would need to swap that over to the new axle if I replace it.

This Blazer will never see a reason to need 4x4. However, I want to make it functional as the rest of the truck is nice.
Name: Image from iOS - Copy.jpg
Views: 227
Size: 72.2 KB

Name: Image from iOS - Copy.jpg
Views: 227
Size: 72.2 KB

Thoughts? Opinions?

09-29-2021, 07:25 PM	#1
1970BannerBlazer Registered User Join Date: Jun 2021 Location: Seattle, WA Posts: 72	Rebuild or replace front axle? Looking for opinions on my dilemma. My, new to me, 1970 Blazer has a front axle problem. Namely its a piece of junk. See photo. Should I rebuild this thing or replace it? Rebuild will require the use of my mechanic and cost around $1300 (I already had to rebuild the entire rear end). Replace will be about $450 for an axle out of a 85 Blazer. The swap I think I can do on my own. That axle would be a 10 bolt and not a Dana 44 like it is now. I have already swapped in a disk brake kit on the front so I would need to swap that over to the new axle if I replace it. This Blazer will never see a reason to need 4x4. However, I want to make it functional as the rest of the truck is nice. Thoughts? Opinions?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.