Anyone with some technical data of the older style cruise on our trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Russell · 07-20-2004, 01:59 PM

Ok, as some of you guys may know, I'm installing a TPI setup in my truck. What I'm trying to figure out is how I am gonna rig up the VSS (Vehicle Speed Sensor) Now, I have that cruise setup with the speedo cable going into a box on my driver's side fender, then out and up to my speedo, does anyone know if I can possibly use that VSS to supply my ECM with the vehicle speed info it needs rather than trying to mess around with my TH400?

What I need to know is what kind of frequency it puts out, and which wires have that information in them...

07-20-2004, 01:59 PM	#1
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Anyone with some technical data of the older style cruise on our trucks Ok, as some of you guys may know, I'm installing a TPI setup in my truck. What I'm trying to figure out is how I am gonna rig up the VSS (Vehicle Speed Sensor) Now, I have that cruise setup with the speedo cable going into a box on my driver's side fender, then out and up to my speedo, does anyone know if I can possibly use that VSS to supply my ECM with the vehicle speed info it needs rather than trying to mess around with my TH400? What I need to know is what kind of frequency it puts out, and which wires have that information in them... __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.