sway bar problem, maybe from frame? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

johnymac · 06-10-2002, 09:58 PM

Just put a real nice sway bar from Early Classics in my truck tonight. The bar seems to be about a 1/4 inch out, to the passanger side. This bar mounts to the front cross member and the ends to the lower control arams.

I have no idea what to do. Has anyone encountered such a problem? I can drive with the bar like this, but not real happy about the frame/control arms being out of square. Not sure if there are any good reference points that I might be able to measure off the frame and get an idea what's wrong here.

Thanks.

06-10-2002, 09:58 PM	#1
johnymac Registered User Join Date: Mar 2001 Location: Dover, NH USA Posts: 194	sway bar problem, maybe from frame? Just put a real nice sway bar from Early Classics in my truck tonight. The bar seems to be about a 1/4 inch out, to the passanger side. This bar mounts to the front cross member and the ends to the lower control arams. I have no idea what to do. Has anyone encountered such a problem? I can drive with the bar like this, but not real happy about the frame/control arms being out of square. Not sure if there are any good reference points that I might be able to measure off the frame and get an idea what's wrong here. Thanks. Last edited by johnymac; 06-10-2002 at 10:23 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.