Broken heater hose coupler extraction - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Second Series · 10-27-2021, 02:47 PM

I’m finally getting to hooking up the engine a year after bringing my truck home from the resto shop. I found the heater hose quick disconnect snapped. I have watched several videos to get an idea of how to proceed. Most of the videos show the Lisle 62200 removal tool. There is also a Napa version that looks more square peg shaped, and a tool that looks like a screw extractor. I’m considering trying the screw extractor. The other tools require pounding it in and from the videos it looks like the brittle coupler piece partially disintegrates from the hammering. Does anyone have any experience with any of these extractors?

10-27-2021, 02:47 PM	#1
Second Series Registered User Join Date: May 2015 Location: Tukwila Washington Posts: 413	Broken heater hose coupler extraction I’m finally getting to hooking up the engine a year after bringing my truck home from the resto shop. I found the heater hose quick disconnect snapped. I have watched several videos to get an idea of how to proceed. Most of the videos show the Lisle 62200 removal tool. There is also a Napa version that looks more square peg shaped, and a tool that looks like a screw extractor. I’m considering trying the screw extractor. The other tools require pounding it in and from the videos it looks like the brittle coupler piece partially disintegrates from the hammering. Does anyone have any experience with any of these extractors? Attached Images __________________ '47 Panel to '88 K2500 Frame Swap Mechanical Speedometer Drive Solution 1947.2 1 ton Chevy Panel 1955.2 Chevy 6700 Bus/RV 1990 Chevy K1500



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.