HG's Dream Car Build - Shelby Cobra Kit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LS short box · 03-11-2022, 06:41 PM

I'm a fix right at first and then move on. Can the machine shop check bore diameter and piston diameter to see if they are within spec? Fix it now or pull it back out when there is a problem. That's a real buzz kill.
I would send all the injectors out to get cleaned and flowed.
Yeah a bit cool here today also. About 5 degrees and nice wind out of the northwest at about 20-25 mph.
Again good luck with your project.

03-11-2022, 06:41 PM	#11
LS short box Registered User Join Date: Jun 2015 Location: Carlos MN Posts: 2,107	Re: HG's Dream Car Build - Shelby Cobra Kit I'm a fix right at first and then move on. Can the machine shop check bore diameter and piston diameter to see if they are within spec? Fix it now or pull it back out when there is a problem. That's a real buzz kill. I would send all the injectors out to get cleaned and flowed. Yeah a bit cool here today also. About 5 degrees and nice wind out of the northwest at about 20-25 mph. Again good luck with your project.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.