Introductions and 1970 C10 Project

[Hatzman]

Originally, I was going to create new power steering lines using AN fittings. What I found was the AN fittings on the power steering box were to high to place the inner fender well back on. Instead of cutting into the fender well, and after some massaging of the original lines, I made them fit. I had to use the small fitting on the back of the old power steering pump so I could use the same ends on the original power steering lines. The new power steering pump (part #198-100) I am using is part of the Holley LS accessory drive and bracket kit. I love the whole set up...