New Trailing Arms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**'68OrangeSunshine** · 04-20-2022, 04:58 PM

My '68 C/10 Stepside got clipped on the rear quarter in a collision last week. I'm thinking my OEM trailing arms may be bent.
Tracking bar or Panhard bar is bent. 12 - Bolt differential grinds like gravel when in gear. Broken axle, maybe? Rear wheel is tweaked, And original paint [RH] step fender is crushed.
Looking at the LMC catalog, they have stock type stamped Control Arms for $269 each. Also, I see some Tubular Tracking Arms for $600 a pair.
Are the tubular ones any better? Can the existing ones be straightened out?

04-20-2022, 04:58 PM	#1
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,512	New Trailing Arms My '68 C/10 Stepside got clipped on the rear quarter in a collision last week. I'm thinking my OEM trailing arms may be bent. Tracking bar or Panhard bar is bent. 12 - Bolt differential grinds like gravel when in gear. Broken axle, maybe? Rear wheel is tweaked, And original paint [RH] step fender is crushed. Looking at the LMC catalog, they have stock type stamped Control Arms for $269 each. Also, I see some Tubular Tracking Arms for $600 a pair. Are the tubular ones any better? Can the existing ones be straightened out? __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.