Correct "stock" rotors & calipers for CPP modular drop spindles?

[WorldsCrappiestTruck]

1968 C10

Driving myself nuts here with the search, Googles and Rockauto trying to find part numbers, etc.

I have a set of CPP modular drop spindles CP30106-2 (63-70) and the caliper brackets (6087DBK).

Factory lower control arms, POL tubular upper control arms.

All of these parts came as a package deal on an unfinished project, so it's sausage-making a bit....

Calipers are GM 18003532 / 18003533 which I find fits a mid-80's C20 (among others).

Rotors, I was an idiot and threw away the boxes before taking a photo, but they measure approx. 1.25" thick, contain the wheel studs, are 6-lug, and use A-3 / A-5 bearing sets.

-----

The problem I'm having, is the rotor and caliper w/pads doesn't line up, no matter how I orient the slightly-bent caliper brackets. Thinking I have incorrect rotors, but given the spindles were for a pre-71 C10, the calipers I have are for a mid-80's C20....and rotors of unknown descent don't line up, I'm confused.

Also working on getting pics loaded for visibility.



Thoughts?