Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
09-11-2022, 06:16 PM | #1 |
Registered User
Join Date: Sep 2016
Location: Redington Beach
Posts: 1,317
|
wiring question - non auto specifc
Have a 12v motor. Specifically a trolling motor. It has three wires power/ground and a 3rd wire for 1/2 speed or full speed (assume).
Problem I have is that all the wires are same color. And I am extending the harness. All OHM out as connected on circuit together. Im assuming in this scenario it makes no real difference as to wiring in terms of damaging motor ? 1 wire will be +ve 1 wire will be -ve 1 wire will be for 1st speed (1/3rd voltage). - blue Full speed is the direct 12v . slow speed is the otehr wire with only 4v. So guessing ? The only thing that can go wrong by applying wires and testing is if the motor goes in reverse ? eg -ve and +ve wires reversed etc ? Or that slow speed would be full speed etc ...... IF thats not the case ...... how do I dentify which wire belongs to what circuit ...... I tried supplying a singal 12v to 1 wire - but they all end up reading 12v .... which makese sense since all 3 are on teh same circuit per the fact they all OHM out the same. thoughts ?
__________________
FAKKY 57 PANEL BUILD |
Bookmarks |
|
|