One vent window done

[72c20customcamper]

Actually was easier than I had built it up my head . Took me about 4 hours start to finish . I found that a die grinder worked better at removing the old rivets. Not impressed with the tool to round the rivets either , didn’t give a nice roll more or less just crushed it . But it will work if I were doing these often I would buy the right tool . I buffed the stainless prior to painting . Found that a piece of I beam worked better than trying to clamp a piece of metal in the vise . But all in all I’m happy with the results . The rubber kit had no name on it but the side glass door felts are Precision products