Assembly of my V8 SBC dual exhaust. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lugnutz65 · 09-14-2022, 09:08 AM

I bought a 16 piece 2” mandrel bent exhaust kit from Amazon. I added 4 or 5 pieces and got to work. My local muffler shop didn’t feel confident enough to tackle the job.
Lots of work to get it done. I’m happy with the layout and pretty happy with the sound. Magnaflow glasspacks. X-pipe was pretty easy because I had to bring pieces to the middle and up between the drive shaft and control arms anyway.
I have a SBC 283 with a 268H cam and factory ram horn exhaust.
Here’s a video.
Good to be back on the road again.

09-14-2022, 09:08 AM	#1
Lugnutz65 Registered User Join Date: Jan 2013 Location: Columbia, SC Posts: 1,927	Assembly of my V8 SBC dual exhaust. I bought a 16 piece 2” mandrel bent exhaust kit from Amazon. I added 4 or 5 pieces and got to work. My local muffler shop didn’t feel confident enough to tackle the job. Lots of work to get it done. I’m happy with the layout and pretty happy with the sound. Magnaflow glasspacks. X-pipe was pretty easy because I had to bring pieces to the middle and up between the drive shaft and control arms anyway. I have a SBC 283 with a 268H cam and factory ram horn exhaust. Here’s a video. Good to be back on the road again. Attached Images __________________ My 65 C10 build: www.lugnutz65chevystepside.weebly.com Want to know more about T5 transmissions? My website has a T5 Info Page and a Step by Step T5 rebuild.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.