Interior lighting - 66 K10 Suburban

[Southcity]

1.The goal: Low voltage dimmable LED interior lighting for all my night time camping, wheeling , driving needs
2. The Vehicle: 1966 Chevy K10 Suburban. This was a Bell Systems fleet vehicle. Driver side door lock only, radio delete plate, no interior door handles etc., it was about as bare bones as you could get.

There are many different ways to build your own system but this is how I did it. I provided links below to the components I used, all from Amazon. It was
very affordable, all in about $65.00 including wiring. I ran this off the
vehicle battery but you could easily run from a small auxilary battery as an option.
Nothing is permanent, everything can be easily removed. No new holes drilled anywhere, I used what was already there from it's previous life. Tiny earth magnets (strong hold) were super glued to the back of the dimmer switch and the LED lights, so things can be moved around, repositioned if needed.
I used insulated bullet connectors on interior connections to be able to swap things out should any component ever fail or get damaged.

LED lights:
https://www.amazon.com/dp/B095CL3ZKP...t_details&th=1

Connectors:
https://www.amazon.com/dp/B07114RK67...roduct_details

small earth magnets:
https://www.amazon.com/dp/B09SLJ1TPT...roduct_details

LED Dimmer Switch:
https://www.amazon.com/dp/B09QC3686T...roduct_details


Driver Side view


Passenger side view


Dimmer Switch


Close up of magnets on light