47-55.1 51 3100 shifter ideas besides column 4L65e - The 1947 - Present Chevrolet & GMC Truck Message Board Network

leegreen · 02-13-2023, 07:40 PM

A rag joint is OK, but only if it is a virtually straight line between shaft in steering box and column. They are not designed to deal with any angle.
They last a long time if they are installed straight and not soaked in gas and oil.

All modern versions are designed so a total failure of the rubber portion of the joint does not cause total steering loss, but that only works if the shafts are in line and stay in line.

02-13-2023, 07:40 PM	#26
leegreen Registered User Join Date: Mar 2022 Location: Surrey BC Posts: 920	Re: 51 3100 shifter ideas besides column 4L65e A rag joint is OK, but only if it is a virtually straight line between shaft in steering box and column. They are not designed to deal with any angle. They last a long time if they are installed straight and not soaked in gas and oil. All modern versions are designed so a total failure of the rubber portion of the joint does not cause total steering loss, but that only works if the shafts are in line and stay in line.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.