Steering column what did I do wrong - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cj847 · 03-01-2023, 03:39 PM

1967 automatic non tilt column.

I disassembled it and replaced the upper and lower bearings. Reassembled and everything seemed fine. But, for lack of a better description, the shift tube is not returning. Basically, there is no safety to keep from pulling it out of park. It was working before disassembly.
There are not many moving parts to this assembly, but I can't figure out what is wrong. It seems almost impossible.
Also, it seems "tight" when moving the shift lever, especially out of park. Any ideas?

03-01-2023, 03:39 PM	#1
cj847 Registered User Join Date: Sep 2016 Location: Ozark, MO Posts: 567	Steering column what did I do wrong 1967 automatic non tilt column. I disassembled it and replaced the upper and lower bearings. Reassembled and everything seemed fine. But, for lack of a better description, the shift tube is not returning. Basically, there is no safety to keep from pulling it out of park. It was working before disassembly. There are not many moving parts to this assembly, but I can't figure out what is wrong. It seems almost impossible. Also, it seems "tight" when moving the shift lever, especially out of park. Any ideas?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.