how hard to take apart NP241 transfer case - The 1947 - Present Chevrolet & GMC Truck Message Board Network

full foot notch · 08-13-2004, 02:35 AM

on the newer chevy's (88-98), how hard is it to take apart the two halfs of the case of a New Process 241 transfer Case , becuase the chain in mine has stretched out and is now grinding, and i need to get the case apart, so i can put a new chain on it (which from chevy is $200 just for the chain itself)

if possible, i would like to just be able to drop the driveshaft and pull off the rear half of the case and be able to replace the chain while the transfer case is still bolted to the tranny, or will i have to pull the whole Tcase off to replace it

08-13-2004, 02:35 AM	#1
full foot notch Registered User Join Date: Apr 2003 Location: Central florida Posts: 3,223	how hard to take apart NP241 transfer case on the newer chevy's (88-98), how hard is it to take apart the two halfs of the case of a New Process 241 transfer Case , becuase the chain in mine has stretched out and is now grinding, and i need to get the case apart, so i can put a new chain on it (which from chevy is $200 just for the chain itself) if possible, i would like to just be able to drop the driveshaft and pull off the rear half of the case and be able to replace the chain while the transfer case is still bolted to the tranny, or will i have to pull the whole Tcase off to replace it



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.