![]() |
![]() |
#1 |
Registered User
Join Date: Jul 2008
Location: Eastern Oregon
Posts: 2,298
|
Stuck At 3 O’clock ?
Very frustrated ! 71 C/20 with stock three hole cluster. Have done all the know tests to determine the cause of my gas gauge needle stuck at the three o’clock position. I checked continuity on the tan wire from the cluster plug all the way to sender, it’s fine. Installed new sender. Have 12 V at pink wire. Tested the resistor 87.3 oms with it off the gauge. When I Bench tested the gauge I used Tom’s instructions. 12V to right side stud on gauge, grounded gauge , then grounded left stud. Result is needle goes further past 3 o’clock a bit. Any other ideas ?
__________________
71 C-20 07 Magnum RT AWD |
![]() |
![]() |
Bookmarks |
|
|