The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-28-2023, 11:32 PM   #1
Spidermonkey
Registered User
 
Join Date: Sep 2016
Location: Garson
Posts: 9
67 key Switch- No 12Ga Brown Wire?

I am looking at hooking up a keyless entry push button start in my 67.
I have a wiring diagram and it shows a 12ga Brown running from the key switch to the fuse block to power up backup lights, blower fan and wiper motor. On the back of my keyswitch and harness to the fuse block there is no 12ga brown. Only the smaller brown/white for the external voltage regulator. Did some Base c10s not use this wire and those circuits are powered through a different method? I am just trying to figure out how power is switched on to those circuits. The key switch and harness only have the Red for power to the switch pink to the coil, 2x Tan and 2x green for the grounding dash lights, purple to the starter and the brown/white for voltage regulator. I can't imagine that all the power is sent a long that small gauge brown/white? What am I missing? Harness looks untouched. Only think I can think of is the pink is also powering that circuit...
Spidermonkey is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:00 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com