"BUILD: 1970 C10 LWB--->SWB “Jumping Cholla” - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**loudchevy** · 10-10-2023, 10:48 AM

Honda door seals get here yesterday so I threw them on the passenger side, clamped/screwed in the outer rocker and hung the door to check all the fit and gaps. I had to trim and modify the rocker a little bit, but I expected that to the be the case. These Honda door seals are a perfect fit. The gaps and door sill looked good.

I ended up getting new cab corners and a high hump trans cover so those will be next on the list. I want to get the cab corners in place before I burn in the outer rockers.

10-10-2023, 10:48 AM	#11
loudchevy Senior Member Join Date: Oct 2012 Location: Phx, AZ Posts: 553	Re: BUILD: 1970 C10 LWB “Jumping Cholla” Honda door seals get here yesterday so I threw them on the passenger side, clamped/screwed in the outer rocker and hung the door to check all the fit and gaps. I had to trim and modify the rocker a little bit, but I expected that to the be the case. These Honda door seals are a perfect fit. The gaps and door sill looked good. I ended up getting new cab corners and a high hump trans cover so those will be next on the list. I want to get the cab corners in place before I burn in the outer rockers. Attached Images __________________ Scott 1970 C10 Restomod\|454/700R4\|LWB-->SWB Build Thread 2014 2500HD DirtyMax\|Daily Driver\|Stock 2003 Tahoe Stock 1985 K5 5.3LS/4L60E\|8Lug 4:56\|3/4 Ton Front\|14BFF Rear\|Roll Cage\|Dove-tailed & Bobbed



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.