power steering head seal replacement now has slack. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dustytrix · 12-07-2023, 07:44 PM

My power steering box was leaking , so I decided to replace all the seals. Got air out once I put it back on the truck. Everything seamed to be working great. I backed it back into shop and left it for a month. Now it has 1/4 turn of slack, I checked fluid, its full. Turned the set screw 1/4 turn on steering box , no change. All I did was replace seals, it didn't have slack before I replaced seals. Any ideas what I did wrong?

12-07-2023, 07:44 PM	#1
Dustytrix Registered User Join Date: Jan 2012 Location: Petal,Ms. Posts: 428	power steering head seal replacement now has slack. My power steering box was leaking , so I decided to replace all the seals. Got air out once I put it back on the truck. Everything seamed to be working great. I backed it back into shop and left it for a month. Now it has 1/4 turn of slack, I checked fluid, its full. Turned the set screw 1/4 turn on steering box , no change. All I did was replace seals, it didn't have slack before I replaced seals. Any ideas what I did wrong? Last edited by Dustytrix; 12-08-2023 at 11:30 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.