Anyone Interested; Body Drop Cab

[Joey-D]

I have been working on this cab for months and am kinda burned out, I just want a rust free cab. It is a 69 cab with a modified 4" body drop. Modified meaning, the rear frame mounts do not move, but he front on are lowered on the frame 1 1/2". Meaning under the seat the floor is raised 4", but in the foot area, it is only raised 2 1/2". I have replaced all four cab mounts, left and right floorboard, passenger side cab corner, rocker, and dog pillar. Also because of the body drop, have a custom inner rocker. I have shaved the heater box and fixed some rust on the firewall. Shaved the drip rails up to the roofline. I just replaced the whole back panel because the original was pretty beat up. I also have the cab corner, rocker, inner rocker, and dog pillar for the drivers side that still need to be installed. There is also rust that need to removed from the roofline (above the windshield), rear corners of the cab floor, and also the footwell to windshield behind the dash needs to be replaced. I have sections from another cab included to use as replacement panels. I have done alot of work to this cab, but just want to move on. I will keep the vin tag, so don't worry if you have a cab with out a title. Pictures are worth a thousand words, so hope fully these speak for themselves. My computer is broke, but I will try and check my email and pm's as often as possible. It would be easier on me and hopefully you if you just called me at 314-226-6420. I live in St. Louis Misouri. My email is JoeyDi84@msn.com. Thanks