55.2-59 57 Fleetside C4 build

[57FleetsideC4]

Still plugging away on this project. I put a battery in it to see where I was on everything that has been done electrically so far. Was able to communicate with the PCM and found a couple of codes for the gas pedal which was my fault as I got a couple of the wires crossed when I took the connector apart to get it through the firewall. The second problem is it would not turn over and that was a broken wire in the supplied engine harness so now will turn over. I wired in the Dakota Digital dash which went really well and programmed it. I am going to try and start it soon and see how that goes. Steve