47-55.1 1950 3100 painless wiring hazards

[sgmacaulay]

I am getting close to done on my 1950 3100 but the hazards and turn signals are giving me trouble. This is a 28 circuit painless kit, it has separate hazard and flashers. The trouble is when I turn on the left turn signal the rear turn signal comes on and the left does too but dimmer. And the gauge lights come flash as if the hazards were on. The right turn signal works just fine. Also when the lights are on so the tail lights are on and I turn on the left turn signal it comes on but does not blink.

The hazards work just fine via the hazards switch.

Using a Gm column from speedway.

The tail lights are LED and I have the painless LED flasher in both sockets.

Any help on were to trouble shoot this issue?