700r4, only reverse and 1st - The 1947 - Present Chevrolet & GMC Truck Message Board Network

R.O.B. · Yesterday, 07:06 PM

So to start with, I've converted over to a 700r4 that is a Facebook Marketplace rebuild special. After a new torque converter and proper fluid fill, I only have park, reverse and 1st. It won't shift up. I just put a pressure tester on it. So cold, about 800rpms, I have 60psi at idle and drive, and 90psi in reverse. Is it like a stuck TV? Or did I get screwed over on the rebuild? TV cable is adjusted properly, governor isn't sticking nor is the plastic gear bad.

Yesterday, 07:06 PM	#1
R.O.B. Registered User Join Date: Jun 2021 Location: Buckeye, AZ Posts: 96	700r4, only reverse and 1st So to start with, I've converted over to a 700r4 that is a Facebook Marketplace rebuild special. After a new torque converter and proper fluid fill, I only have park, reverse and 1st. It won't shift up. I just put a pressure tester on it. So cold, about 800rpms, I have 60psi at idle and drive, and 90psi in reverse. Is it like a stuck TV? Or did I get screwed over on the rebuild? TV cable is adjusted properly, governor isn't sticking nor is the plastic gear bad. Last edited by R.O.B.; Yesterday at 07:14 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.