chevy 250 inline intake/exhuast bolt config

[kljfamily]

Hello,

65 c10 250
77 c10 250 engine.

On my project, my 650 250 bit the dust hard.

Found a good 250 from a 77. Using the non-inegrated head from my 250.

On the 2 piece exhaust/intake. You have 5 bolts and 1 threaded stud with 6 flanges. 4 short and 2 long. I neglected to take a pic of where the short and long went and position.

Does anyone have a pic or can let me know here the long/short flanges go.

Thanks