Lowly the 70 shortbed convert v2.0

[zicc1835]

Originally Posted by hewittca

I agree SCOTI, it is a bit counterintuitive to raise the front rails after going all in on the QA-1 setup. Thing is, I never feel like I can get low enough! Funny story, I emailed QA-1 and asked if they had a photo of a truck with this suspension adjusted to it's lowest height. The reply I got was, Why would you want to see that?! They did say that if you run 15" wheels you might not be able to adjust the coilovers to their lowest setting. All this had me worried I wouldn't reach the drop I wanted so I decided I will raise the front rails, if at the very least I don't have to run the coilovers all the way down. I am going to Z the frame right at the firewall. I am already dropping the horns 1" for the body drop, so what's one more inch there as well. In the rear I am still doing the 4.5" raised rails like I did on Bluey, so this frame is going to be down (bumper), up (front suspension), down (cab), up (rear suspension), down (bumper), all with a body drop for an extra 1" overall!

looking forward to see the progress .... first we need to stay warm