292 options for temp gauge sender

[leegreen]

To close off the discussion, here is how I solved both problems in this thread.

I ordered a stainless 5/8 barb-barb 90 degree elbow, cut it in half and rewelded with more bend to suit. I also welded on a threaded fitting to take my temperature gauge sender as that was cheaper and easier than buying a new pipe tap to thread the thermostat housing.

I did not think to take pictures before putting fitting and the radiator on, this is the best I could do:

from in front


and from top


As long as nothing leaks when I get it up to pressure this will work.
Thanks everyone for the ideas.