Painless harness help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chickenwing · 09-11-2004, 11:10 PM

I've finished the interior and now have started headlight section.

The GM factory wiring diagram for a 72 C/K shows the side marker lights wired in series with the front park lamps/turn signal. Ground appears to be through rear side markers.

The Painless instuctions instruct "wire #927 (Brn) to all front park lights."

Do I wire each side marker/turn signal in series as in the original? Or, do I chassis ground the front side markers and turn signal lights?

Any help appreciated.
Rich

09-11-2004, 11:10 PM	#1
chickenwing Lovin' Life in Miss.! Join Date: Mar 2004 Location: Puckett, Mississippi Posts: 1,937	Painless harness help I've finished the interior and now have started headlight section. The GM factory wiring diagram for a 72 C/K shows the side marker lights wired in series with the front park lamps/turn signal. Ground appears to be through rear side markers. The Painless instuctions instruct "wire #927 (Brn) to all front park lights." Do I wire each side marker/turn signal in series as in the original? Or, do I chassis ground the front side markers and turn signal lights? Any help appreciated. Rich __________________ The truck... you hear that? No really, you did hear that?!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.