Major Bearing Problems...Need HELP - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Long Knight · 09-17-2004, 08:06 PM

Hey Everyone,

I have a huge SNAFU problem here and need some help.

I had to replace the inside bearing of the passenger side rear hub (is that an axle bearing even though it's not on the axle?). Anyway, bearing and seal are correct but the race is wrong. NAPA gave me a 382A first, too small. They ordered me a 383A, too big! It is so close, but not close enough. The original measures 3.89"OD, 383A= 3.91"OD. I know it doesn't seem like much, but it won't go in. It presses tight into where the seal goes, but that's it.

If anyone can help with the right part #, it would be greatly appreciated. I've had the truck up on a stand for awhile and I'm afraid 1) the city will do something with it or 2) the wife will do something with it.

09-17-2004, 08:06 PM	#1
Long Knight Spank 'em if you got 'em! Join Date: Nov 2002 Location: Kansas City Posts: 628	Major Bearing Problems...Need HELP Hey Everyone, I have a huge SNAFU problem here and need some help. I had to replace the inside bearing of the passenger side rear hub (is that an axle bearing even though it's not on the axle?). Anyway, bearing and seal are correct but the race is wrong. NAPA gave me a 382A first, too small. They ordered me a 383A, too big! It is so close, but not close enough. The original measures 3.89"OD, 383A= 3.91"OD. I know it doesn't seem like much, but it won't go in. It presses tight into where the seal goes, but that's it. If anyone can help with the right part #, it would be greatly appreciated. I've had the truck up on a stand for awhile and I'm afraid 1) the city will do something with it or 2) the wife will do something with it. __________________ Long Knight '71 C-20, 350ci, TH350, Edl. 1406 Carb w/elec.choke, Ignitor ignition, Viper Tires, Orange Dipstick



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.