shaved doors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dropped72shortbed · 04-08-2002, 03:43 AM

call up summit and order yourself a VPA handle shaving kit for $120. id upgrade from 15lb solenoids to the next up, 25 or 35lb pull.

ive installed this kit on a 64 tempest and two 94+ s10s. comes with everything you need, minus the door filler plates since its obviously a universal kit.

the instructions with the kit are easy to follow. all you need is a little wire crimping set and a drill and your all set to go. can be installed in bout 3 hours.

[This message has been edited by dropped72shortbed (edited April 08, 2002).]

04-08-2002, 03:43 AM	#2
dropped72shortbed Registered User Join Date: Nov 2001 Posts: 303	call up summit and order yourself a VPA handle shaving kit for $120. id upgrade from 15lb solenoids to the next up, 25 or 35lb pull. ive installed this kit on a 64 tempest and two 94+ s10s. comes with everything you need, minus the door filler plates since its obviously a universal kit. the instructions with the kit are easy to follow. all you need is a little wire crimping set and a drill and your all set to go. can be installed in bout 3 hours. [This message has been edited by dropped72shortbed (edited April 08, 2002).] __________________ Blake A. - Huntington Beach CA 72 c10 swb 5/5 drop, 350/350, partialy shaved, soon to be 5/7 on 20s.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.