A couple Fatman and HTH pictures - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68LSS1 · 10-10-2004, 07:15 PM

Finally after 3 years of planning, buying, changing, starting over, etc I get to do some assembly. The frame is just in epoxy primer as I plan on building the truck and the dissassembling for paint/powdercoat. This first picture is of the Hot Rods to Hell kit. The only thing missing is the adjustable panhard rod (and rearend).

This picture shows the adjustable spring set up.

Here's a frame shot, hopefully it doesn't come out too dark.

Here's a picture of the Fatman Stage III front end.

Let's try this

10-10-2004, 07:15 PM	#1
68LSS1 Registered User Join Date: Dec 2002 Location: Tampa Posts: 1,191	A couple Fatman and HTH pictures Finally after 3 years of planning, buying, changing, starting over, etc I get to do some assembly. The frame is just in epoxy primer as I plan on building the truck and the dissassembling for paint/powdercoat. This first picture is of the Hot Rods to Hell kit. The only thing missing is the adjustable panhard rod (and rearend). This picture shows the adjustable spring set up. Here's a frame shot, hopefully it doesn't come out too dark. Here's a picture of the Fatman Stage III front end. Let's try this __________________ '68 Short Step LS1/T56, Hydratech, Fatman Fabrications Stage III, Baer, Hot Rods to Hell, US Body, S&W, etc Last edited by 68LSS1; 10-10-2004 at 07:17 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.