Need a Muncie SM465 to NP205 adapter and sleeve. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cobb_ben · 10-13-2004, 10:38 PM

I need the adapter and the sleeve to mount a NP205 on a Muncie SM465 transmission. The NP205 is currently bolted on a TH400. I don't want to run the automatic transmission. The 6.05 granny low and the 1.95 low side of transfercase and the 4.56 gears would be a lot more potent than a 2.48 automatic. I am wanting to covert a 76 C30 to a 4x4. I have found a 78 complete, its a K20, so I would only have a 44 or 10 bolt, they're good for 35s, don't have money for lift to run, bigger

I got 285/75R16s now so it looks 4x4, would like to get a dana 60 later, then 38s.

Any information on this type of conversion would be appricated, esp if you have the adapter.
Thanks
Ben

10-13-2004, 10:38 PM	#1
cobb_ben Registered User Join Date: Feb 2004 Location: Fort Leonard Wood Mo Posts: 299	Need a Muncie SM465 to NP205 adapter and sleeve. I need the adapter and the sleeve to mount a NP205 on a Muncie SM465 transmission. The NP205 is currently bolted on a TH400. I don't want to run the automatic transmission. The 6.05 granny low and the 1.95 low side of transfercase and the 4.56 gears would be a lot more potent than a 2.48 automatic. I am wanting to covert a 76 C30 to a 4x4. I have found a 78 complete, its a K20, so I would only have a 44 or 10 bolt, they're good for 35s, don't have money for lift to run, bigger I got 285/75R16s now so it looks 4x4, would like to get a dana 60 later, then 38s. Any information on this type of conversion would be appricated, esp if you have the adapter. Thanks Ben



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.