whats this steering wheel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tnblazerk5** · 10-25-2004, 09:08 AM

whats this off of ? i think it off of a 70 olds wagon ?!?!

i need the horn button and those parts for it . if anybody knows let me know please

Brainchild · 10-25-2004, 10:03 AM

I don't know, but it's a cool looking wheel

GMan69 · 10-25-2004, 10:17 AM

Not for sure, but it looks kinda like the sport wheel from '78-'87 G- body Cutlass.

**StingRay** · 10-25-2004, 11:53 AM

Looks like Cutlass 442 to me. I know a guy that had one just like that on his car. It was a 71 or 72

**tnblazerk5** · 10-25-2004, 12:09 PM

ok where can i look for cutlass parts at ?

i thought would make a really cool wheel for the 67

**tkeduk8r** · 10-25-2004, 12:54 PM

Just a note from an olds guy... those are the sport wheels most commonly found on olds 442s and cutlass s from 69-77... they could also be found in an occasional olds omega also.. if you find one, it will be pretty spendy... somewhere upwards of 100 bucks... more likely around 175-250 for a good one... BUT I have seen one ore two in our trucks and they are pretty sweet.. I run the chevrolet version (3 spoke) in my 70 and my 74... i dig em...
--Mike

Stano · 10-25-2004, 08:56 PM

I got one of em but need the same parts(horn button and mechanism). Thought it would be a cool wheel for my 67 also.

**tnblazerk5** · 10-29-2004, 09:57 PM

ok i am having trouble finding all the parts i need to to put this on

i have looked a lot of places and came up with nothing they all want to sell me the wheel and all i dont need the wheel i got that

from the looks of the chevy 3 spoke version i think that will work (anybody know for sure ?) does anybody have a pic of the 3 spoke center parts ? any help here would be very thankfull

Huck · 10-30-2004, 09:05 AM

Any Camero/Corvette aftermarket parts dealer will have the parts for this wheel. The parts are also common to the 3 spoke corvette, buick, pontiac. If you have the wheel, you will need the hub and the monting hardware for the horn button. The wheel and the horn button is available in several variations and colors---. check online as it is not rare.

FRENCHBLUE72 · 10-30-2004, 09:07 AM

Hope you find the part's that's a pretty sweet looking wheel... Kinda similar to the old track style wheel's...

silvertonguedevil · 10-30-2004, 12:09 PM

I'm not sure what it is out of but it looks similiar to the one that's in adman123's truck. You could always pm him.

**tnblazerk5** · 10-30-2004, 12:24 PM

man that looks good in there!!!!!!!!!!!!!!

and i will pm him. thanks greatly for the pic

**tnblazerk5** · 10-30-2004, 12:28 PM

Quote:

Originally Posted by Huck

Any Camero/Corvette aftermarket parts dealer will have the parts for this wheel. The parts are also common to the 3 spoke corvette, buick, pontiac. If you have the wheel, you will need the hub and the monting hardware for the horn button. The wheel and the horn button is available in several variations and colors---. check online as it is not rare.

i liked on line for sum of these they all wanted to sale me the wheel and hub and horn stuff as a package deal

but all i want is the horn button and the stuff inside it i got the wheel and hub i recon i am lookin in the wrong places or just lookin to hard for it

FirstGen · 10-30-2004, 12:55 PM

You can always get stuff from Year One if you are needing actual resto parts like the horn and stuff. I had a '69 442 vert and I bought ALOT of stuff from them!

adman123 · 11-01-2004, 09:51 AM

Got my steering wheel from lmc I will track down the phone number for you.

10-25-2004, 09:08 AM	#1
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	whats this steering wheel whats this off of ? i think it off of a 70 olds wagon ?!?! i need the horn button and those parts for it . if anybody knows let me know please

10-25-2004, 10:03 AM	#2
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	I don't know, but it's a cool looking wheel __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

10-25-2004, 10:17 AM	#3
GMan69 Registered User Join Date: Mar 2001 Location: Hernando, MS USA Posts: 1,152	Not for sure, but it looks kinda like the sport wheel from '78-'87 G- body Cutlass. __________________ George Morgan Hernando, MS '69 C-10 swb fleetside '72 GMC swb Stepside

10-25-2004, 11:53 AM	#4
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	Looks like Cutlass 442 to me. I know a guy that had one just like that on his car. It was a 71 or 72 __________________ Saskatoon, Saskatchewan Canada

10-25-2004, 12:54 PM	#6
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Just a note from an olds guy... those are the sport wheels most commonly found on olds 442s and cutlass s from 69-77... they could also be found in an occasional olds omega also.. if you find one, it will be pretty spendy... somewhere upwards of 100 bucks... more likely around 175-250 for a good one... BUT I have seen one ore two in our trucks and they are pretty sweet.. I run the chevrolet version (3 spoke) in my 70 and my 74... i dig em... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

10-25-2004, 12:09 PM	#5
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	ok where can i look for cutlass parts at ? i thought would make a really cool wheel for the 67

10-25-2004, 08:56 PM	#7
Stano Registered User Join Date: Jul 2000 Location: Mo Posts: 963	I got one of em but need the same parts(horn button and mechanism). Thought it would be a cool wheel for my 67 also. __________________ New daily driver 96 Chevy K3500 crew cab dually 53,000 miles 350 Vortec 4L80 Nice ride 67 Chevy C-10 LWB Built 350 TH-400 Wifes ride and family rig: 2001 Furd Expedition 5.4 Liter Kickin back in Rolla,Mo. USA "Do the thing you fear most and the death of fear is certain" Mark Twain

10-29-2004, 09:57 PM	#8
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	ok i am having trouble finding all the parts i need to to put this on i have looked a lot of places and came up with nothing they all want to sell me the wheel and all i dont need the wheel i got that from the looks of the chevy 3 spoke version i think that will work (anybody know for sure ?) does anybody have a pic of the 3 spoke center parts ? any help here would be very thankfull

10-30-2004, 09:05 AM	#9
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Any Camero/Corvette aftermarket parts dealer will have the parts for this wheel. The parts are also common to the 3 spoke corvette, buick, pontiac. If you have the wheel, you will need the hub and the monting hardware for the horn button. The wheel and the horn button is available in several variations and colors---. check online as it is not rare.

10-30-2004, 09:07 AM	#10
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Hope you find the part's that's a pretty sweet looking wheel... Kinda similar to the old track style wheel's... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

10-30-2004, 12:09 PM	#11
silvertonguedevil Senior Member Join Date: May 2004 Location: Seaside, Oregon Posts: 1,789	I'm not sure what it is out of but it looks similiar to the one that's in adman123's truck. You could always pm him. Attached Images __________________ -Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4

10-30-2004, 12:24 PM	#12
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	man that looks good in there!!!!!!!!!!!!!! and i will pm him. thanks greatly for the pic

10-30-2004, 12:55 PM	#14
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	You can always get stuff from Year One if you are needing actual resto parts like the horn and stuff. I had a '69 442 vert and I bought ALOT of stuff from them! __________________ 1968 C10 build in process TT LSA/6L90e/9"

11-01-2004, 09:51 AM	#15
adman123 Registered User Join Date: Oct 2004 Location: TAMPA FL Posts: 12	Got my steering wheel from lmc I will track down the phone number for you.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.