|
06-29-2002, 11:10 AM
|
#1 |
|
Registered User
Join Date: Feb 2002
Location: point blank
Posts: 113
|
wiring problems
I did not have turn signals fixed that, now i have turn signals and no brake, tail, or hazard lights. Headlights still work though. any Ideas?
__________________
1968 GMC CST long wide box http://groups.yahoo.com/group/67-72-collectors/ |
|
|
|
06-29-2002, 01:11 PM
|
#2 |
|
Senior Member
Join Date: Jul 2001
Location: Hughesville, MD
Posts: 1,350
|
I had similar symptoms a few weeks ago. Mine was a bad ground on the bed. A quick way to see if that is the case is to remove taillight assy and run a jumper from the back of the assy to a known good ground. If rear lights work at that point, Your harness may be grounded out on the frame or the bed could be loose. If I knew how to atach the post I had here, I would. but there is a few posts on here that would be some help.
Hope I helped some, Mario
__________________
Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue **Parting out** 77 MG Midget **Parting out** 15 6.7L Cummins |
|
|
|
|
06-29-2002, 01:24 PM
|
#3 |
|
Senior Member
Join Date: Jul 2001
Location: Hughesville, MD
Posts: 1,350
|
I brought the other threads forward for you. I hope they help.
Mario
__________________
Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue **Parting out** 77 MG Midget **Parting out** 15 6.7L Cummins |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
