What did you get done-Thanksgiving edition. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BaggedC10 · 11-29-2004, 11:23 AM

Quote:

Originally Posted by fiveeightchevy

Someone is interested in buying it but I'm gonna be shaving all the trim holes, stakes, driver gas door, side markers and repairing the bent rear driver quarter for now. I may just keep working on it and drop in a new crate motor. I've got all the paint/clear/catalyst to repaint it too so who knows.

Sweet! Keep it and finish her.

oldraven · 11-29-2004, 11:46 AM

I finally finished painting the truck. I managed to get one of the bed runners on, and the chrome trim above the doors. Tonight I put the grille, bumper, hl bezels, and chrome hood deflector back on. The other bed runner too.

I pulled a late one last night, but at least I got it done.

**Captkaos** · 11-29-2004, 12:16 PM

I wished I was able to say I worked on a 73-87, but I didn't. I worked on my Jeep TJ this vacation. Wednesday after discovering the hub was stripped out I had to drill the lugs off, Thurday I got the frontend put back together and went a bought a new radiator. This one had a leak starting ( 132K miles) Sunday I replaced it.

87SierraClassic · 11-29-2004, 12:49 PM

switched out power steering pumps over the holiday.

8t5Silverado · 11-29-2004, 02:12 PM

Realized how little I like my family, again.

gldevall · 11-29-2004, 02:21 PM

Got in somewhat of a race with a WRX from a 35 roll. He got into it before I did, but only got a 1/2 car on me. Pulled over and talked a bit. He said it runs about 14.2's. 1st time I've had the truck out, or even started it, in about 5 weeks.

Slonaker · 11-29-2004, 03:23 PM

Cleaned the truck up inside and out Saturday evening. It rained on the way to work this morning...

Went to a swap meet yesterday, and did not find anything I need. I saw my father-in-law there, and told him I saw someone walking around with the steering wheel I want. He said "you don't need a steering wheel." I think that means he bought me one for Christmas.

I got the SBC in my Dad's '37 Chevy running again last night. He was in poor health for quite a while, and it really went downhill fast before he died.

Hopefully I can get it inspected soon, and start driving it.

Slonaker

*1FaastC10* · 11-29-2004, 05:25 PM

did the family thing all day Thursday, 75+ people.
got up Friday, stripped the 4.56s out of my C&C 14FF, and loaded it into the back of my truck by myself. did the family thing again, with the other side of the family, for birthday parties (5 of us all within a week, so we did one party)
Saturday got up, went to Ill to pick up some Dana 60 hubs, then delivered the 14FF, and went and picked up a set of driveshafts.
i spent Sunday putting brake lines on my K20, as soon as i would replace the bad one, another would blow. getting ready to head out right now to bleed the brakes. hopefully no more blown lines, cuz if they blow, i'm gonna cry.

CT-Truckster · 11-29-2004, 11:10 PM

well, I managed to remove a few more parts from my truck

75-K5 · 11-30-2004, 12:25 AM

I made out fairly well. I got my 400 completely torn down to a bare block (with a few minor mishaps, see Engine forum). I also went to pick up my new th350 and hydro clutch parts from 1faastc10. It may sound like one small step for most, but it was one giant leap for me.

11-29-2004, 11:46 AM	#27
oldraven Registered User Join Date: Apr 2004 Location: Antigonish, Nova Scotia Posts: 869	I finally finished painting the truck. I managed to get one of the bed runners on, and the chrome trim above the doors. Tonight I put the grille, bumper, hl bezels, and chrome hood deflector back on. The other bed runner too. I pulled a late one last night, but at least I got it done. __________________ '86 C10 regular cab, 383 on propane www.cardomain.com/id/doasa '87 TurboCoupe 2.3Turbo intercooled 5-spd www.cardomain.com/id/oldraven '93 Jeep Grand Cherokee 4.0L

11-29-2004, 12:16 PM	#28
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	I wished I was able to say I worked on a 73-87, but I didn't. I worked on my Jeep TJ this vacation. Wednesday after discovering the hub was stripped out I had to drill the lugs off, Thurday I got the frontend put back together and went a bought a new radiator. This one had a leak starting ( 132K miles) Sunday I replaced it. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

11-29-2004, 02:12 PM	#30
8t5Silverado Mudslides 'r my specialty Join Date: Dec 2003 Location: STL Posts: 1,106	Realized how little I like my family, again. __________________ Always on the lookout for old cars and parts...(20s, 30s, 40s, 50s, 60s, etc.) http://www.cardomain.com/memberpage/500339

11-29-2004, 02:21 PM	#31
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Got in somewhat of a race with a WRX from a 35 roll. He got into it before I did, but only got a 1/2 car on me. Pulled over and talked a bit. He said it runs about 14.2's. 1st time I've had the truck out, or even started it, in about 5 weeks. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

11-29-2004, 03:23 PM	#32
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	Cleaned the truck up inside and out Saturday evening. It rained on the way to work this morning... Went to a swap meet yesterday, and did not find anything I need. I saw my father-in-law there, and told him I saw someone walking around with the steering wheel I want. He said "you don't need a steering wheel." I think that means he bought me one for Christmas. I got the SBC in my Dad's '37 Chevy running again last night. He was in poor health for quite a while, and it really went downhill fast before he died. Hopefully I can get it inspected soon, and start driving it. Slonaker __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado

11-29-2004, 12:49 PM	#29
87SierraClassic Registered User Join Date: Sep 2003 Location: Austin, TX Posts: 14	switched out power steering pumps over the holiday.

11-29-2004, 05:25 PM	#33
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	did the family thing all day Thursday, 75+ people. got up Friday, stripped the 4.56s out of my C&C 14FF, and loaded it into the back of my truck by myself. did the family thing again, with the other side of the family, for birthday parties (5 of us all within a week, so we did one party) Saturday got up, went to Ill to pick up some Dana 60 hubs, then delivered the 14FF, and went and picked up a set of driveshafts. i spent Sunday putting brake lines on my K20, as soon as i would replace the bad one, another would blow. getting ready to head out right now to bleed the brakes. hopefully no more blown lines, cuz if they blow, i'm gonna cry.

11-29-2004, 11:10 PM	#34
CT-Truckster ? Join Date: Jul 2002 Location: Dyersburg, TN Posts: 471	well, I managed to remove a few more parts from my truck Attached Images

11-30-2004, 12:25 AM	#35
75-K5 Bucket of Bolts Join Date: Dec 2003 Location: Anderson, Indiana Posts: 455	I made out fairly well. I got my 400 completely torn down to a bare block (with a few minor mishaps, see Engine forum). I also went to pick up my new th350 and hydro clutch parts from 1faastc10. It may sound like one small step for most, but it was one giant leap for me. __________________ This is the project that never ends, yes it goes on and on my friend....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.