need picture of 2002-1999 wheels on 3/4 ton - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bill72BB · 06-29-2002, 01:08 AM

Does anyone have pictures of these rims on a 3/4 ton . I found a vendor who has the lug nuts to mount the caps ,so now I'm thinking about getting a set for the BB .

Thanks Bill

Blue_71 · 06-29-2002, 02:16 AM

im wanting to put those on my 4x4, but with the price i doubt i will

OhioDan · 06-29-2002, 03:30 AM

You might try and check with these guys. They have a lot of factory wheels and centers.

http://truckandrv.com/index.html

That's where I got the rims, centers, lug nuts and the lug nut covers for my truck. Price was good also.

Bill72BB · 06-29-2002, 11:52 AM

Blue_71

I'm thinking I can get a set of take off's cheaper than buying rims and tire's .

I know someone has these rims on our trucks, he is the one who told me the lug nut to mount the caps were available.

Bill

Blue_71 · 06-29-2002, 12:32 PM

all the ones ive seen on ebay (take off or new) have been any where from 200-700. the ones for $200 im sure were run up pretty quickly

Mike C · 06-29-2002, 07:54 PM

The new Four Wheeler magazine has a new project truck. It was a 1/2 ton 4x4 71 'burb that has now been converted to 3/4 ton axles. They've got a color photo of it with those wheels on it.

Bill72BB · 06-30-2002, 05:07 PM

Thanks Mike ;

I'll have to try to get a copy.

Bill

KD · 06-30-2002, 09:24 PM

I put these on today,I got them off e-bay for 190 bucks plus shipping,included new rings and center caps.They are new.

fluffytx1 · 06-30-2002, 10:53 PM

I just put chrome mods on and now i am thinking of a switch

UNCLEBOB · 06-30-2002, 11:36 PM

Bill72BB what is the width and backspacing on those rims. Thanks

Bill72BB · 07-01-2002, 11:08 AM

KD'
Nice wheels where did you get the special lug nuts to mount the caps ??

Uncle bob . not sure about the backspacing ,but they come in 6 and 6 1/2 wide

Bill

KD · 07-01-2002, 07:10 PM

Bill I got the lug nuts from NAPA,32 nuts @3.94 each,ouch.

wnc mountain · 07-01-2002, 09:35 PM

I have a set of steel 8-lugs off of my 99 burb trim rings and center caps the works if anyone is interested. Not sure about the width and setback on them.

I can take some pictures of them and post. Have them in boxes. Been there since the truck was new.

06-29-2002, 01:08 AM	#1
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,979	need picture of 2002-1999 wheels on 3/4 ton Does anyone have pictures of these rims on a 3/4 ton . I found a vendor who has the lug nuts to mount the caps ,so now I'm thinking about getting a set for the BB . Thanks Bill Attached Images __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

06-29-2002, 03:30 AM	#3
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	You might try and check with these guys. They have a lot of factory wheels and centers. http://truckandrv.com/index.html That's where I got the rims, centers, lug nuts and the lug nut covers for my truck. Price was good also. Attached Images __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.

06-29-2002, 11:52 AM	#4
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,979	Blue_71 I'm thinking I can get a set of take off's cheaper than buying rims and tire's . I know someone has these rims on our trucks, he is the one who told me the lug nut to mount the caps were available. Bill __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

06-29-2002, 07:54 PM	#6
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,727	The new Four Wheeler magazine has a new project truck. It was a 1/2 ton 4x4 71 'burb that has now been converted to 3/4 ton axles. They've got a color photo of it with those wheels on it. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

06-30-2002, 05:07 PM	#7
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,979	Thanks Mike ; I'll have to try to get a copy. Bill __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

06-30-2002, 09:24 PM	#8
KD Truck Nut Join Date: Mar 2000 Location: Big Lake,MN,US Posts: 134	I put these on today,I got them off e-bay for 190 bucks plus shipping,included new rings and center caps.They are new. Attached Images __________________ '70 3/4 manual w/350 4.56's .Doing a ground up on a '67 4x4 4"lift.

06-30-2002, 10:53 PM	#9
fluffytx1 Registered User Join Date: Feb 2002 Location: point blank Posts: 113	nice I just put chrome mods on and now i am thinking of a switch __________________ 1968 GMC CST long wide box http://groups.yahoo.com/group/67-72-collectors/

06-30-2002, 11:36 PM	#10
UNCLEBOB Registered User Join Date: May 2000 Location: bremerton wa 98310 Posts: 100	Bill72BB what is the width and backspacing on those rims. Thanks __________________ 68 lwb 383 solid roller,250dur, 582lift, afr 210s, 10.8 comp. edel.rpm, 750vs,1 3/4 headers turbo 400, 3500 stall,ford 9 inch 3.89 gears

07-01-2002, 11:08 AM	#11
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,979	KD' Nice wheels where did you get the special lug nuts to mount the caps ?? Uncle bob . not sure about the backspacing ,but they come in 6 and 6 1/2 wide Bill __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

07-01-2002, 07:10 PM	#12
KD Truck Nut Join Date: Mar 2000 Location: Big Lake,MN,US Posts: 134	Bill I got the lug nuts from NAPA,32 nuts @3.94 each,ouch. __________________ '70 3/4 manual w/350 4.56's .Doing a ground up on a '67 4x4 4"lift.

07-01-2002, 09:35 PM	#13
wnc mountain More hobbies than money! Join Date: Jan 2002 Location: Raleigh, nc, usa Posts: 655	I have a set of steel 8-lugs off of my 99 burb trim rings and center caps the works if anyone is interested. Not sure about the width and setback on them. I can take some pictures of them and post. Have them in boxes. Been there since the truck was new. __________________ '70 cst10/swb 350, 3 on the tree, factory buckets. '70 GMC lwb 350/350 ps,pb '72 c-10 lwb 350/350 a/c, ps, pb '72 Blazer project Last edited by wnc mountain; 07-01-2002 at 09:45 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.