![]() |
![]() |
#1 |
Garage Queen Material
Join Date: Oct 2002
Location: USA
Posts: 4,129
|
rearend is back in!!!
to bad its to late to drive it tonight. i just now got done. those damn u bolts took forever to get the nuts on them. I'm tired too. tommorow it gets a wash after the rain and then its cruising time
![]() |
![]() |
![]() |
![]() |
#2 |
Hotwheels?
Join Date: Dec 2002
Location: Pleasant Hill, CA
Posts: 1,145
|
Wow. now you can have a 0-60 in under 10 seconds
![]() your 40-80 is prolly like 4 seconds, but whos counting ![]() Congrats, keep us informed.
__________________
1978 Money Pit - CUSTOM DELUXE!!!! |
![]() |
![]() |
![]() |
#3 |
Right turn Clyde
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
|
I wouldnt lean on it to hard
![]()
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI |
![]() |
![]() |
![]() |
#4 |
Garage Queen Material
Join Date: Oct 2002
Location: USA
Posts: 4,129
|
its crazy. i'm gonna have to get used to spinning 3500 rpm's at 75mph.
and the speedo reads correctly too now ![]() |
![]() |
![]() |
![]() |
#5 | |
paper or plastic?
Join Date: Nov 2002
Location: SW Missouri
Posts: 671
|
Quote:
![]()
__________________
1967 Chevy SWB 250 http://67-72chevytrucks.com/vboard/s...d.php?t=442157 1977 Chevy SWB 454 No More 454 getting 5.3 http://67-72chevytrucks.com/vboard/s...d.php?t=310518 1977 Stepside Truck of the month winner http://67-72chevytrucks.com/vboard/s...d.php?t=135524 1965 Chevy C10 454 http://67-72chevytrucks.com/vboard/s...d.php?t=731372 1975 Dodge Power Wagon http://67-72chevytrucks.com/vboard/s...=1#post7871388 |
|
![]() |
![]() |
![]() |
#6 | |
Garage Queen Material
Join Date: Oct 2002
Location: USA
Posts: 4,129
|
Quote:
it still pulls really nice above 70mph though ![]() |
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: May 2004
Location: Lubbock, Texas
Posts: 2,121
|
or a 4l60E or 4l80E, just what do you have money for...
__________________
'96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer |
![]() |
![]() |
![]() |
#8 | |
Account Suspended
Join Date: Oct 2002
Location: Elkhart, IN
Posts: 6,400
|
Quote:
|
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: May 2004
Location: Lubbock, Texas
Posts: 2,121
|
yes i know, and if you want to get technical, like i always do, after 87 the 700R4 are 4L60, and it wasn't untill later that they became the 4L60E, but some people like not having to worry about transmission at all so they go with overkill, like having a turbo 400 behind a 305.
__________________
'96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Sep 2003
Location: Lewisville, NC
Posts: 1,836
|
I wouldn't worry about a regular 700r4 behind his 355, its not putting out enough power to kill one, but a 700r4 would be way nicer than that th350, I couldn't stand to turn 3500rpm while cruising, but I bet it moves. 3500 rpm is what my VW with 3.94 gears and a 5 speed tranny turns at 75mph.
__________________
1985 Scottsdale Shortbed 4x4 Stout 350 with some "upgrades"-700r4-33x12.5" Mud Tires, Warn 8274-50 winch. 2005 Chevrolet Colorado Regular Cab 2wd 4-banger, 5 speed, Street Pack with 3.73 axle. |
![]() |
![]() |
![]() |
#11 | |
Registered User
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
|
Quote:
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's |
|
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: May 2004
Location: Lubbock, Texas
Posts: 2,121
|
a stock 305 has enough power to kill a stock pre 87 700R4
__________________
'96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer |
![]() |
![]() |
![]() |
#13 |
Garage Queen Material
Join Date: Oct 2002
Location: USA
Posts: 4,129
|
i finally found a dry road tonight. everyother road was wet and would spin the tires anytime i floored it below 45mph it would spin and go sideways.
so anyways, i found this road that was dry. i stoped, held the brake and revved to about 2000rpms then launched it in 1st gear. without even flooring it, maybe 3/4 throttle, it got sideways and i had to shift into 2nd before i knew it ![]() ![]() ![]() i think i'm gonna have the same problem ryan has, finding traction ![]() |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
|
told ya
![]()
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's |
![]() |
![]() |
![]() |
#15 | |
Garage Queen Material
Join Date: Oct 2002
Location: USA
Posts: 4,129
|
Quote:
![]() i'm wondering if drag radials will even help, would it just wheel hop a bunch with them? |
|
![]() |
![]() |
![]() |
#16 |
Join Date: Jan 2003
Location: Modesto, CA
Posts: 1,321
|
You DID let the new gears work harden, right?!?!
|
![]() |
![]() |
![]() |
#17 | |
Garage Queen Material
Join Date: Oct 2002
Location: USA
Posts: 4,129
|
Quote:
|
|
![]() |
![]() |
![]() |
#18 |
Right turn Clyde
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
|
We will see how long it holds up. Powerbraking, new gears and posi doesn't sound to good together. Not that I want anything to happen with it. I dont think it had enough time to setup properly really. Did you let the rear end cool down when driving it short distances? I doubt this will apply to your truck. If you plan on towing anything with it you will need to be easy on it and let it cool down 3-4 times in short distances. Work hardening creates a lot of heat that's why you need to let them cool down. If they get to hot and the gear oil gets to hot them bad things can happen.
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI |
![]() |
![]() |
![]() |
#19 |
Garage Queen Material
Join Date: Oct 2002
Location: USA
Posts: 4,129
|
i put about 100miles on it today. let it cool for the first 15 and then the next 30 miles. i didnt really get on it until i had the 100 or so miles on it
|
![]() |
![]() |
![]() |
#20 |
yeller
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,826
|
Might need new axles soon too.
![]() At least you don't have 4.10's! I was getting 3000+ RPm at 60 MPH. ![]()
__________________
Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale |
![]() |
![]() |
![]() |
#21 |
Under construction!
Join Date: Aug 2002
Location: NorCal
Posts: 1,065
|
Install a parallel 4-link w/ F9000's behind-the-axle, Eric. Maybe that will help you gain *some* traction.
![]()
__________________
2001 Silverado bagged on 22's. *Sold* |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|