Introductions..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

doc_rock · 12-09-2004, 01:36 AM

Well, I purchased some parts on e-bay, and got directed to this fine forum you guys are keeping here. I was all into the spirit of getting back into building 4-wheeled machines, but I keep hitting brick walls. So, here's what I got.

Purchased a 1969 Chevrolet Custom-10, according to the VIN came with a 3 speed and a V-8.350. Well, start trying to put parts on it, and none of them fit. Tonight, I finally crawl up in there and get the number off the block. 14010202. Early 80's passenger car 305. Teeee-riffic. I may as well have a 4.3 in a full size.

Wait. I got one of those too. Let's just start the slow Chevy house around here.

Anyways, I have a few questions for you guys, and I'm really just looking for some ideas to play with. I've got a 1965 350 4bolt, been sitting since sometime last century, hell, I can't even remember if it has a single or a double barrel carb on it, it's been so long. It's out of a 1965 C20 monster, with the ridiculous gears (5.14:1 or something), so it's a low end engine, and I'm not too worried about it on the tall geared 3 speed. Here's my dillema: I was planning on putting one of the 350's on a stand and building a fire breather out of it, however now I have a 305 and a 350. The 305 is so tired it can hardly run the water pump, and I don't think it's too wise to put any more money into it.

Also, the '65 doesn't have a distributor, fuel pump, and a handful of other things. How close to compatible are these two blocks?

Forgive me, I got into motorcycles heavily and have forgotten all my chevrolet knowlege. I shall regain it, surely.

Thanks for any and all help you guys can provide. Sorry to be such a long winded old airbag on my first post, but I'm perturbed.

68w/sbc406 · 12-09-2004, 01:38 AM

hopefully i am not stupid, but i thought that they didnt make 350s in 65, that they started in 69 or something
EDIT: Welcome to the board from portland or

cableguy0 · 12-09-2004, 01:40 AM

all small block chevy stuff is interchangeable heads intake distributors fuel pumps water pumps bracketry. wouldnt reccomend using the 305 heads on a 350 though

TugOwar · 12-09-2004, 01:45 AM

Welcome from Texas and good luck with the truck.

doc_rock · 12-09-2004, 01:53 AM

Thanks for the welcomes! I've got a couple buddies up in the Portland area on a motorcycle board I almost live at. Seem like nice folks....

Ya know, I don't know. The truck I pulled the engine from was a 1965, all was SUPPOSEDLY stock, but I have no way of knowing. I guess I'll find out this weekend when I go get the engine.

Anybody know anything abotu this?

*dtlilly* · 12-09-2004, 01:56 AM

Welcome from WI. If that's actually a 350 in the 65, then it was put there. Maybe it's a 327? Either way, ya, everything will interchange.

Warbones · 12-09-2004, 02:11 AM

(welcome) From Kansas

Blue Beard · 12-09-2004, 05:44 AM

Welcome from SW Washington State...

Rod · 12-09-2004, 10:11 PM

Welcome.

hobby67stepside · 12-09-2004, 10:57 PM

I have to agree with 68w. I don't know for sure what year the 350 was introduced, but I am certain it was not as early as '65. I think it might have been as late as '70.

mr402 · 12-09-2004, 11:04 PM

350 came out in 69 for the big cars and trucks. I think it was dropped into Camaros in 67 or 68 though. Welcome to the board.

*Gee_Emm* · 12-09-2004, 11:06 PM

Welcome from Canada eh!

useRc10 · 12-09-2004, 11:31 PM

I agree, i think the 350 in trucks started in '69...everything will interchange...just changed the 305 out in my '85 for a 350 and only had to get a new flywheel

OLDROCK&ROLLER · 12-10-2004, 09:06 AM

Welcome from North Carolina. You have come to the right place cause we have been there and done that when it comes to these trucks.

67ChevyRedneck · 12-10-2004, 09:25 AM

Everyone is right, the first generation of chevy "truck" 350's was '69-'78. You may want to run the numbers on that engine too. A guy at work was told his '69 was stock but he purhcased something for the motor and it didn't fit. So he had the numbers run and it was really a 327 out of a late 60's corvette, can't remember the year at the moment. Changing the 305 to a 327/350 isn't difficult at all. Good luck and welcome to the wonderful world of "why the

won't this fit???"

Hunter · 12-10-2004, 10:06 AM

Welcome from Sunny Northern Arizona!

krue · 12-10-2004, 01:13 PM

Welcome to the board from South Mississippi!

jeffnstef · 12-10-2004, 01:49 PM

Hotrodders Knolwedge Small Block Chevy Engine Identification Menu

doc_rock · 12-26-2004, 11:13 PM

Actaully, turned out to be a 1973! Casting numbers say it could be a 302/327/350, but date stamp says November 13, 1973. Just finished reassembling it today, hopefully get it put in tommorow after work.

Longhorn Man · 12-26-2004, 11:31 PM

Welcome to the forum.

Quote:

Purchased a 1969 Chevrolet Custom-10, according to the VIN came with a 3 speed and a V-8.350

How did the VIN tell you that?

**Palf70Step** · 12-26-2004, 11:40 PM

WElcome to the board from south Mississippi. Glad to have you join the extended family

doc_rock · 12-26-2004, 11:42 PM

Quote:

Originally Posted by Longhorn Man

Welcome to the forum.

How did the VIN tell you that?

Ah, but it didn't! You are correct, sir. The VIN told me it came witha 350. The sawed off colum shift handle, and the GM1 cast three speed transmission with a floor shift insinuated it came with a 3 speed manual.

Longhorn Man · 12-27-2004, 12:07 AM

If the second digint of the VIN is an E, then it came with a V-8, but that could be a 307, 350, or a 396. (last year for the 396)
If the option sheet shows no engine option, then a 307 was the engine originally in your truck.

doc_rock · 12-27-2004, 02:42 AM

It shows an E, again, assuming it has the original badging on it, it has the 350 badges. The intake and carb that were on the 305 match up to numbers that were put on a 1969 350, but again, it could be anything, really, including the badging. Unfortunately, there is no build sheet, and the glove box is gone. Any other ideas where I can get some more information off the truck itself?

Brainchild · 12-27-2004, 03:29 AM

Don't toss the 305,shoot the crank will work in a 350,so will all the brackets,pumps,and ect.
Kinda hard to second guess the truth about a 30 year old truck,I would say it had a 350 in it

Welcome to the forums from Missouri,this is your best source of Info anywhere on these trucks.

12-09-2004, 01:36 AM	#1
doc_rock Registered User Join Date: Dec 2004 Location: Jacksonville, FL Posts: 84	Introductions..... Well, I purchased some parts on e-bay, and got directed to this fine forum you guys are keeping here. I was all into the spirit of getting back into building 4-wheeled machines, but I keep hitting brick walls. So, here's what I got. Purchased a 1969 Chevrolet Custom-10, according to the VIN came with a 3 speed and a V-8.350. Well, start trying to put parts on it, and none of them fit. Tonight, I finally crawl up in there and get the number off the block. 14010202. Early 80's passenger car 305. Teeee-riffic. I may as well have a 4.3 in a full size. Wait. I got one of those too. Let's just start the slow Chevy house around here. Anyways, I have a few questions for you guys, and I'm really just looking for some ideas to play with. I've got a 1965 350 4bolt, been sitting since sometime last century, hell, I can't even remember if it has a single or a double barrel carb on it, it's been so long. It's out of a 1965 C20 monster, with the ridiculous gears (5.14:1 or something), so it's a low end engine, and I'm not too worried about it on the tall geared 3 speed. Here's my dillema: I was planning on putting one of the 350's on a stand and building a fire breather out of it, however now I have a 305 and a 350. The 305 is so tired it can hardly run the water pump, and I don't think it's too wise to put any more money into it. Also, the '65 doesn't have a distributor, fuel pump, and a handful of other things. How close to compatible are these two blocks? Forgive me, I got into motorcycles heavily and have forgotten all my chevrolet knowlege. I shall regain it, surely. Thanks for any and all help you guys can provide. Sorry to be such a long winded old airbag on my first post, but I'm perturbed.

12-09-2004, 01:38 AM	#2
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	hopefully i am not stupid, but i thought that they didnt make 350s in 65, that they started in 69 or something EDIT: Welcome to the board from portland or __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

12-09-2004, 01:40 AM	#3
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	all small block chevy stuff is interchangeable heads intake distributors fuel pumps water pumps bracketry. wouldnt reccomend using the 305 heads on a 350 though __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

12-09-2004, 02:11 AM	#7
Warbones Navel Inspector Join Date: Mar 2003 Location: Wichita, Ks Posts: 1,373	(welcome) From Kansas __________________ 1948 Chevy Aerosedan GONE! I think. 1984 Cadillac Fleetwood Brougham Coupe WANTED 1967 IMPALA 1967 CST C10 Long Bed with a 283

12-09-2004, 05:44 AM	#8
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Welcome from SW Washington State... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

12-09-2004, 01:45 AM	#4
TugOwar Registered User Join Date: Sep 2004 Location: Pleasanton, TX Posts: 1,723	Welcome from Texas and good luck with the truck.

12-09-2004, 01:53 AM	#5
doc_rock Registered User Join Date: Dec 2004 Location: Jacksonville, FL Posts: 84	Thanks for the welcomes! I've got a couple buddies up in the Portland area on a motorcycle board I almost live at. Seem like nice folks.... Ya know, I don't know. The truck I pulled the engine from was a 1965, all was SUPPOSEDLY stock, but I have no way of knowing. I guess I'll find out this weekend when I go get the engine. Anybody know anything abotu this?

12-09-2004, 01:56 AM	#6
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Welcome from WI. If that's actually a 350 in the 65, then it was put there. Maybe it's a 327? Either way, ya, everything will interchange.

12-09-2004, 10:11 PM	#9
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Welcome. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

12-09-2004, 10:57 PM	#10
hobby67stepside Registered User Join Date: Dec 2001 Location: NW Iowa Posts: 952	I have to agree with 68w. I don't know for sure what year the 350 was introduced, but I am certain it was not as early as '65. I think it might have been as late as '70.

12-09-2004, 11:04 PM	#11
mr402 Registered User Join Date: Jan 2004 Location: Elmira, Oregon Posts: 449	350 came out in 69 for the big cars and trucks. I think it was dropped into Camaros in 67 or 68 though. Welcome to the board.

12-09-2004, 11:06 PM	#12
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Welcome from Canada eh!

12-09-2004, 11:31 PM	#13
useRc10 Registered User Join Date: Feb 2001 Location: Mechanicsville, VA, 23111 Posts: 1,138	I agree, i think the 350 in trucks started in '69...everything will interchange...just changed the 305 out in my '85 for a 350 and only had to get a new flywheel __________________ -'02 Chevy Avalanche, 5.3L, 4x4... needing a small lift and bigger tires -'72 Chevy C-10(350, bored 60 over)dual flowmasters, 3 on the tree -'85 K5 Blazer,305 NO MORE...350 is in,2" lift,33" Mickey Thompson Baja Claw Radials -dads '70 burb (red, 5-7 drop, 350...) www.geocities.com/userc10/truckhome.html AIM: Auntjoedadda

12-10-2004, 09:06 AM	#14
OLDROCK&ROLLER Registered User Join Date: Feb 2004 Location: WHITEVILLE N.C. Posts: 494	Welcome from North Carolina. You have come to the right place cause we have been there and done that when it comes to these trucks. __________________ 72 CHEYENNE 10 SUPER 468/400/3.73

12-10-2004, 09:25 AM	#15
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Everyone is right, the first generation of chevy "truck" 350's was '69-'78. You may want to run the numbers on that engine too. A guy at work was told his '69 was stock but he purhcased something for the motor and it didn't fit. So he had the numbers run and it was really a 327 out of a late 60's corvette, can't remember the year at the moment. Changing the 305 to a 327/350 isn't difficult at all. Good luck and welcome to the wonderful world of "why the won't this fit???"



Register or Log In To remove these advertisements.

12-10-2004, 10:06 AM	#16
Hunter Lovin' Arizona Since 1961 Join Date: Jul 2004 Location: Camp Verde, Arizona Posts: 173	Welcome from Sunny Northern Arizona! __________________ "Religion is like a toothbrush: Everybody should have one, but I don't want yours" - Will Rogers

12-10-2004, 01:13 PM	#17
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Welcome to the board from South Mississippi! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-10-2004, 01:49 PM	#18
jeffnstef Registered User Join Date: Dec 2004 Location: Manchester, NH Posts: 64	couple of interesting links Hotrodders Knolwedge Small Block Chevy Engine Identification Menu

12-26-2004, 11:13 PM	#19
doc_rock Registered User Join Date: Dec 2004 Location: Jacksonville, FL Posts: 84	Actaully, turned out to be a 1973! Casting numbers say it could be a 302/327/350, but date stamp says November 13, 1973. Just finished reassembling it today, hopefully get it put in tommorow after work.

12-26-2004, 11:40 PM	#21
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	WElcome to the board from south Mississippi. Glad to have you join the extended family __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

12-27-2004, 12:07 AM	#23
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	If the second digint of the VIN is an E, then it came with a V-8, but that could be a 307, 350, or a 396. (last year for the 396) If the option sheet shows no engine option, then a 307 was the engine originally in your truck.

12-27-2004, 02:42 AM	#24
doc_rock Registered User Join Date: Dec 2004 Location: Jacksonville, FL Posts: 84	It shows an E, again, assuming it has the original badging on it, it has the 350 badges. The intake and carb that were on the 305 match up to numbers that were put on a 1969 350, but again, it could be anything, really, including the badging. Unfortunately, there is no build sheet, and the glove box is gone. Any other ideas where I can get some more information off the truck itself?

12-27-2004, 03:29 AM	#25
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	Don't toss the 305,shoot the crank will work in a 350,so will all the brackets,pumps,and ect. Kinda hard to second guess the truth about a 30 year old truck,I would say it had a 350 in it Welcome to the forums from Missouri,this is your best source of Info anywhere on these trucks. __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.