'71 2 wheel drive Blazer project for trade. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pinkneyss · 12-15-2004, 04:48 PM

I started this a few years ago & I just don't have the time to do anything with it. The body is in good shape except for the front fenders (bottoms are rusted) & rocker panels. There is a little rust in the bottom corners of the windshield opening. I'll get pics of those rust spots later. The top is in prety good shape, but needs work on the rear hatch. The hood was perfect, but the wind blew it over & put a few dents in it..

I have all the glass for the truck, but all the rubbers will need to be replaced, I cut them to get the glass out. The truck has factory tilt, power brakes (disk), and power steering. I also put a new plastic tank (the one from JC Whitney) & sending unit in it a few months before I troe it all apart. I have all the parts off the truck, like the hood hinges, vent windows, wiring harnesses, etc. The wiring harness isn't the best, it was all cut & spliced before I got the truck.. If I think of anything else I'll add it here & I'll also add more pics later this evening..

I'm looking to trade the Blazer for a 2 wheel drive SWB '67-'72 truck.. I prefer a short fleetside but I'll consider a stepside or long bed.. I also would consider GM cars (Nova, Chevelle, Camaro, etc.). Just let me know what you have.. I'm in Cut-N-Shoot, TX, about 35 miles north east of Houston..

HuggerCST · 12-15-2004, 05:08 PM

Do you have an engine/trans? If so, what are they and what condition are they in?

CHEVYE · 12-15-2004, 05:12 PM

are you thinking of selling for cash? if so how much? without engine/trans, also are you looking for something more complete or in project status like the blazer? thanks.

pinkneyss · 12-15-2004, 05:16 PM

I don't have an engine/transmission for the truck.. What I'm really hoping to find is a complete short bed truck that I can drop an engine in & drive. I'd like something in decent shape, not something that will have to be torn apart to fix a bunch of rust. I also might take cash, but I really don't have a clue how much to ask for. If you want to make me an offer I'll consider it..

pinkneyss · 12-15-2004, 05:24 PM

Here are the pics of the rust spots.. In my opinion they are very minor..

LUV2XCLR8 · 12-15-2004, 06:20 PM

MAN, I WISH I HAD A TRUCK 2 TRADE, I'D BE DOWN THERE THIS WEEKEND

71swb4x4 · 12-15-2004, 06:52 PM

Am I seeing leaf springs in the rear or is that just a shadow?

CHEVYE · 12-15-2004, 06:56 PM

Quote:

Originally Posted by 71swb4x4

Am I seeing leaf springs in the rear or is that just a shadow?

looks like trailing arms to me.

71swb4x4 · 12-15-2004, 07:24 PM

Quote:

Originally Posted by CHEVYE

looks like trailing arms to me.

Yep, now I feel silly.

Chevy Muscle · 12-15-2004, 08:11 PM

I have a line on a '72 shortbed.

I'll give you more info as soon as I can.

bagged74 · 12-15-2004, 10:36 PM

hmmm, i just happen to have a 68 to trade, and i need another blazer. PM sent.

pinkneyss · 12-16-2004, 12:16 PM

It's raining here today so I can't get more pics. I'll take them tomorrow & send them to everyone who asked..

Thanks!

ChevyDude · 12-16-2004, 07:03 PM

What would your cash price be.....then you could buy the SWB truck with the toad skins!

Blue Beard · 12-16-2004, 08:39 PM

Looks like you've done alot of work to let her go...

pinkneyss · 12-17-2004, 07:26 PM

ChevyDude - I would prefer to find someone to trade with, but I might sell the truck.. I really don't know how much the truck is worth or how much to ask for. If you want to make me an offer on it I'll consider it..

Blue Beard - I just lost interest in the truck.. Now I bought 3 acres of land & I'm planning on building a house soon so I won't have the $$ to anything with it.. It's been sitting too long & needs to find a good home..

I took more pictures today, you can check them out by clicking the link below (there are 2 pages, be sure to check them both out).

http://photobucket.com/albums/v108/pinkneyss/Blazer/

12-15-2004, 04:48 PM	#1
pinkneyss Registered User Join Date: Nov 2004 Location: Cut-N-Shoot, TX Posts: 18	'71 2 wheel drive Blazer project for trade. I started this a few years ago & I just don't have the time to do anything with it. The body is in good shape except for the front fenders (bottoms are rusted) & rocker panels. There is a little rust in the bottom corners of the windshield opening. I'll get pics of those rust spots later. The top is in prety good shape, but needs work on the rear hatch. The hood was perfect, but the wind blew it over & put a few dents in it.. I have all the glass for the truck, but all the rubbers will need to be replaced, I cut them to get the glass out. The truck has factory tilt, power brakes (disk), and power steering. I also put a new plastic tank (the one from JC Whitney) & sending unit in it a few months before I troe it all apart. I have all the parts off the truck, like the hood hinges, vent windows, wiring harnesses, etc. The wiring harness isn't the best, it was all cut & spliced before I got the truck.. If I think of anything else I'll add it here & I'll also add more pics later this evening.. I'm looking to trade the Blazer for a 2 wheel drive SWB '67-'72 truck.. I prefer a short fleetside but I'll consider a stepside or long bed.. I also would consider GM cars (Nova, Chevelle, Camaro, etc.). Just let me know what you have.. I'm in Cut-N-Shoot, TX, about 35 miles north east of Houston.. Last edited by pinkneyss; 12-17-2004 at 11:49 PM.

12-15-2004, 05:08 PM	#2
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Do you have an engine/trans? If so, what are they and what condition are they in? __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

12-15-2004, 05:12 PM	#3
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	are you thinking of selling for cash? if so how much? without engine/trans, also are you looking for something more complete or in project status like the blazer? thanks. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

12-15-2004, 05:16 PM	#4
pinkneyss Registered User Join Date: Nov 2004 Location: Cut-N-Shoot, TX Posts: 18	I don't have an engine/transmission for the truck.. What I'm really hoping to find is a complete short bed truck that I can drop an engine in & drive. I'd like something in decent shape, not something that will have to be torn apart to fix a bunch of rust. I also might take cash, but I really don't have a clue how much to ask for. If you want to make me an offer I'll consider it.. Last edited by pinkneyss; 12-15-2004 at 06:00 PM.

12-15-2004, 06:20 PM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	MAN, I WISH I HAD A TRUCK 2 TRADE, I'D BE DOWN THERE THIS WEEKEND __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

12-15-2004, 05:24 PM	#5
pinkneyss Registered User Join Date: Nov 2004 Location: Cut-N-Shoot, TX Posts: 18	Here are the pics of the rust spots.. In my opinion they are very minor..

12-15-2004, 06:52 PM	#7
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Am I seeing leaf springs in the rear or is that just a shadow? __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

12-15-2004, 08:11 PM	#10
Chevy Muscle < 69 Blazer Join Date: Mar 2004 Location: Nevada, TX Posts: 293	I have a line on a '72 shortbed. I'll give you more info as soon as I can.

12-15-2004, 10:36 PM	#11
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	hmmm, i just happen to have a 68 to trade, and i need another blazer. PM sent.

12-16-2004, 12:16 PM	#12
pinkneyss Registered User Join Date: Nov 2004 Location: Cut-N-Shoot, TX Posts: 18	It's raining here today so I can't get more pics. I'll take them tomorrow & send them to everyone who asked.. Thanks!

12-16-2004, 07:03 PM	#13
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	What would your cash price be.....then you could buy the SWB truck with the toad skins! __________________ Alex 1971 Lil' Red 350 SBC 700R4

12-16-2004, 08:39 PM	#14
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Looks like you've done alot of work to let her go... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

12-17-2004, 07:26 PM	#15
pinkneyss Registered User Join Date: Nov 2004 Location: Cut-N-Shoot, TX Posts: 18	ChevyDude - I would prefer to find someone to trade with, but I might sell the truck.. I really don't know how much the truck is worth or how much to ask for. If you want to make me an offer on it I'll consider it.. Blue Beard - I just lost interest in the truck.. Now I bought 3 acres of land & I'm planning on building a house soon so I won't have the $$ to anything with it.. It's been sitting too long & needs to find a good home.. I took more pictures today, you can check them out by clicking the link below (there are 2 pages, be sure to check them both out). http://photobucket.com/albums/v108/pinkneyss/Blazer/ Last edited by pinkneyss; 12-17-2004 at 11:50 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.