4 new torque thrust center caps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

low 84 · 12-17-2004, 01:49 AM

these are 4 new american racing torque thrust center caps. they aren't the cheapies with decals on them. they are engraved "American Racing" and have the chevy crossed flags engraved on them (vette style). they are still shrink rapped in the boxes, but i think they have new hardware in them because it sounds like screws are in the boxes as well.

i think these are pretty expensive caps, but i will take $25 plus shipping for the set.

thanks

RON WOODGEARD · 12-17-2004, 02:25 AM

Quote:

Originally Posted by low 84

these are 4 new american racing torque thrust center caps. they aren't the cheapies with decals on them. they are engraved "American Racing" and have the chevy crossed flags engraved on them (vette style). they are still shrink rapped in the boxes, but i think they have new hardware in them because it sounds like screws are in the boxes as well.

i think these are pretty expensive caps, but i will take $25 plus shipping for the set.

thanks

Pics man,Pics !!! and move it to the For sale section...

low 84 · 12-17-2004, 09:39 AM

oops, sorry about that. i ment to put this in the 67-72 forsale forum. was a little late last night and i was out of it. if a mod could move it for me that would be great.

i'll put up some pics later today.

thanks

Tuck · 12-17-2004, 02:18 PM

I will take them if they are not the plastic ones.

Send me and e mail of how you would like the funds.

j1tuckman@wmconnect.com

Bamm · 12-17-2004, 02:21 PM

2nd in line please - I'd like to see a pic of them either way to see what the cross flags look like. I've seen the ones with the F#@d style V* emblem on them, and I've seen the "ss" engraved ones but haven't seen the corvette cross flags ones. And are they metal or plastic? Thanks, ....Jerry

low 84 · 12-17-2004, 04:46 PM

they are metal ones. i really think these are expensive like 100 bucks a set or something. i just dont have torque thrusts so i have no need for them. i'm on my luch break right now, i'll send you an email tuck when i get off this eveing

kxmotox247 · 12-17-2004, 05:45 PM

Put me in line after these guys...I'll buy em' for sure.
email: kxmotox247@yahoo.com

low 84 · 12-18-2004, 11:25 PM

sold. thanks tuck!

12-17-2004, 01:49 AM	#1
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	4 new torque thrust center caps these are 4 new american racing torque thrust center caps. they aren't the cheapies with decals on them. they are engraved "American Racing" and have the chevy crossed flags engraved on them (vette style). they are still shrink rapped in the boxes, but i think they have new hardware in them because it sounds like screws are in the boxes as well. i think these are pretty expensive caps, but i will take $25 plus shipping for the set. thanks __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

12-17-2004, 09:39 AM	#3
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	oops, sorry about that. i ment to put this in the 67-72 forsale forum. was a little late last night and i was out of it. if a mod could move it for me that would be great. i'll put up some pics later today. thanks __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

12-17-2004, 02:21 PM	#5
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	2nd in line please - I'd like to see a pic of them either way to see what the cross flags look like. I've seen the ones with the F#@d style V* emblem on them, and I've seen the "ss" engraved ones but haven't seen the corvette cross flags ones. And are they metal or plastic? Thanks, ....Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

12-17-2004, 04:46 PM	#6
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	they are metal ones. i really think these are expensive like 100 bucks a set or something. i just dont have torque thrusts so i have no need for them. i'm on my luch break right now, i'll send you an email tuck when i get off this eveing __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

12-17-2004, 05:45 PM	#7
kxmotox247 Senior Member Join Date: Jul 2002 Location: Champaign, IL Posts: 1,397	Put me in line after these guys...I'll buy em' for sure. email: kxmotox247@yahoo.com __________________ Baby Blue's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=652776 Project 68's Build Thread: http://67-72chevytrucks.com/vboard/s...17#post8442117 www.stonecolumnclassics.com Email: Josh@stonecolumnclassics.com

12-17-2004, 02:18 PM	#4
Tuck Registered User Join Date: Aug 2001 Location: pell city,AL Posts: 263	I will take them if they are not the plastic ones. Send me and e mail of how you would like the funds. j1tuckman@wmconnect.com

12-18-2004, 11:25 PM	#8
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	sold. thanks tuck! __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.